How to use Poly Buckles: 6 Steps
1. Cut length of strapping tape approximately 60cm longer than length required to encircle items to be secured.
2. Position strapping around items as desired. Where strapping meets, form a loop with each end, with the tail ends of the strapping facing away from each other.
3. Feed the two loops through the square hole in the Poly Buckle until they are protruding about 4cm.
4. Fold the “dog bone” legs of the buckle through the two loops of strapping.
5. Pull the loops back through the buckle. Make sure the strapping is central on the legs and through the hole in the buckle.
6. Apply tension to ends of strapping until items are secured to your desire.
IMPORTANT NOTICE
These instructions are to act as a guide only. No responsibility can be taken by the supplier of this guide for any damage/failures or injury as a result of using these instructions.
You can Purchase Poly Buckles right here at Tegral.
Products
Vehicle First Aid Kit
GWORX Eco PU Gloves
$2.75 – $3.00
Hard Hat Reflective Tape Curved – 2 Pack
4 Point Hard Hat Chin Strap – Webbing
2 Point Hard Hat Chin Strap – Elastic
Chain Kit – 6mm x 6m Grab Hooks
Vehicle Ratchet Tie Down J Hook – 3m x 50mm x 2500kg
$35.30 ex GST
Container Door Opening Bar
F Track Rope Tie Off 50mm x 100mm
$7.50 ex GST
E Track Rope Tie Off 50mm x 100mm
$7.50 ex GST
Endless Ratchet Tie Downs
$14.50 – $23.00